Its so cheap its worth a shot, lets shoot some whippets 

http://cgi.ebay.com/KLX-110-KLX-125-Dirtbike-Nitrous-Kit-w-5-NOS-Refills_W0QQitemZ320255350056QQihZ011QQcategoryZ11332QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

four-stroke 

gets up pretty quick once the vtec kicks in.. 

Suzuki DR350, its been about 8 years since I have ridden.. and I got my first Suzuki Endruo when I was like 10, this will be my 4th



I needed another vehicle so I was not stranded when the GolfKart was being worked on, this wont cost me anything to park in LoDo or insure, or fill with gasoline and I can take it out to Rampheart Range on the weekends and tear up like 80 miles of trails..

For $850 I think I got a pretty good deal, bike is in great condition.. Will proably powder coat the frame and paint everything black this winter

-R

http://www.freemansupply.com/ - Plastics, Foams, Mold Making, Mass Production

Ceramic Coating Products, rated to 2000F

TurboX - http://www.caswellplating.com/aids/techline/agl.html
Black Satin Header Coating - http://www.caswellplating.com/aids/techline/

http://boydwelding.com/ - Custom Aluminum Tanks

http://stores.ebay.com/EverythingFabricatedInc - Aluminum Battery Boxes

http://intakehoses.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=I&Category_Code=CHEW - Cobra Head 90 degree couplers

What color smoke? Sounds like a leaky headgasket to me... your gona have to pull your head regardless so yank it off and find out the issue..

depends on if these things also simulate the readyness status, because I believe thats all they check..

would be pretty easy to detect you had it wired in there, because speed, rpm, time since start, etc will all be obviously wrong if they decide to look at any of those values..  but then again you could get some kinda electronic potomoter and do some nifty electrical engineering hacking the hell out of it to hook outputs from your standalone into the simulator, and out the OBDII protocoll.. hrmmmm

damnit, I re-read the title and realized it said 'to' not 'a'

your a woman, I dont think 1 min of bitching is enough to keep you from exploding..

google found this shit..
http://www.pegasusautoracing.com/productselection.asp?Product=3252

Mocal makes nice thermostatic plates for VR, I am sure I saw an option for 1.8's... I got a used volvo oil cooler core that jesse is going to weld -AN fittings on, then I am having the shop down the road make some nice SS braided lines.  Ive been told you can get NPT fittings on just once over the brittish standard on the volvo core, If you dont care about disconnecting the lines from the cooler I'd use JBWeld and regular NPT fittings and be cheap and dirty..

I think I remember reading that you can use the oil cooler plate off a volvo on a 1.8 with no problems, do some research and head to a junk yard.. might get lucky and find everything you need for next to nothing.

Wikipedia FTW
http://en.wikipedia.org/wiki/Harlequin_type_ichthyosis

Crazy shit

After playing GTA:IV for almost a week now I need to get GPS for my ride.. It makes running from the police much easier!

 

Nunu, my WG is open.. I have a motorcycle muffler on the dump tube tho.. sounds great