doing work son!

verrückter vw

The Jury has returned a verdict of Douchebag.
Jr. Applebag

Posts: 86

Re: doing work son!

« Reply #15 on: August 05, 2008, 01:12:34 PM »

so its been a while, but here is the status of my car! there are alot of "inbetween" pics that are missing so thats why it shows from bare welds on one pic and primer in the next. i didn't even take any pics of the work i did on the fire wall! the engine bay work still isn't done yet but it was so tedious that i almost abandoned the project so its only 3/4 of the way finished. I will be finishing the rest of the bay when the motor comes back out for some more goodies/parts... so for now i decided to mount the vrt in there and have some fun with it for a little while before i take it back off the road for PHASE II:twisted::twisted: .:R28T

and i just purchased this... haldex anyone?:metal::metal::metal:

Right now its looks like im going to be running a mkIV trans/transfercase, but im talking with two different people about buying their 08 r32 dsg trans/transfer case!!! obviously the MKIV setup will cost WAY WAY WAY less... BUT, if everything checks out with the dsg, im going to buy it! Ill keep you guys posted up as i make progress! :thumbup:


	Logged

parasight

Demonic Horde
Shriveled Applebag

Posts: 2890

you cant tell me I'm not in space.

Re: doing work son!

« Reply #16 on: August 05, 2008, 01:56:18 PM »

cant wait to see how you hack that in. dance!


	Logged

dci PHL.

Real hip-hop is NOT on the radio.

verrückter vw

The Jury has returned a verdict of Douchebag.
Jr. Applebag

Posts: 86

Re: doing work son!

« Reply #17 on: August 05, 2008, 02:22:06 PM »

i think ill use some wood screws, or jb weld!!! monk

probably going to relocate the motor to the roof of the car and cut off the front end for weight savings thumbsup

!
and for the dsg... i think ill just twist the wires together? or just use aligator clips to hold them together! the paddles will be mounted under the drivers seat for optimal shifting ability dance!

and the drivers seat will be on the passenger side where the back seat was! i think i might also try to turn it into a trike? 3x3 baby!
and by the time im done with everything it should look like this...


« Last Edit: August 05, 2008, 02:29:59 PM by verrückter vw »	Logged

verrückter vw

The Jury has returned a verdict of Douchebag.
Jr. Applebag

Posts: 86

Re: doing work son!

« Reply #18 on: August 07, 2008, 11:51:12 AM »

well, the dsg is going to run me about 5k shipped... :eek:
so i either save up for a little while, as im installing the rearend... OR i can just buy the 04 r32 trans and transfer for 2200 shipped!?!? hmmm build a really cool car with the 04 setup, or build the only mkII dsg haldex vrt in the world? im going to have to think about this one! as far as i know the only dsg swap ever done yet was into a 4cyl mkIV? don't believe anyone has done a 6cyl dsg swap yet let alone into a mkII! any feedback from you guys, im torn on what to do!!!


	Logged

parasight

Demonic Horde
Shriveled Applebag

Posts: 2890

you cant tell me I'm not in space.

Re: doing work son!

« Reply #19 on: August 07, 2008, 12:01:13 PM »

is "fuck right off" an option you were looking for?


	Logged

dci PHL.

Real hip-hop is NOT on the radio.

verrückter vw

The Jury has returned a verdict of Douchebag.
Jr. Applebag

Posts: 86

Re: doing work son!

« Reply #20 on: August 07, 2008, 02:15:01 PM »

...its an option! thumbsup

any real advice? or is this WAY over most of your heads?

seriously why do you guys talk so much shit? is it cause im from nor cal, or part of wcm? didn't think i ever started any shit w/any of you!?
back on topic... does anyone know where to find the electrical information for the dsg? as far as power, signal, tcm pinouts, etc??? any help would be greatly appreciated!


	Logged

parasight

Demonic Horde
Shriveled Applebag

Posts: 2890

you cant tell me I'm not in space.

Re: doing work son!

« Reply #21 on: August 07, 2008, 02:26:57 PM »

yeah, its over our heads... we just build rabbits with 16vs on carbs anymore, because its easy.

as far as the wiring diagrams, I have them all with me here at work.

no, you cant have them.


	Logged

dci PHL.

Real hip-hop is NOT on the radio.

verrückter vw

The Jury has returned a verdict of Douchebag.
Jr. Applebag

Posts: 86

Re: doing work son!

« Reply #22 on: August 07, 2008, 02:39:57 PM »

I didn't know toys'R'us had wiring diagrams....
16v's with carbs is a hard build?????? hahahahahaha dance!


	Logged

Pickle

Demonic Horde
Wonders what it's like outside

Posts: 13799

Re: doing work son!

« Reply #23 on: August 10, 2008, 01:11:11 PM »

Toys R Us is the best you can come up with?

Fucking amateur hour.


	Logged

"The very existence of flame-throwers, proves that some time, somewhere, someone said to themselves, `You know, I want to set those people over there on fire, I'm just not close enough to get the job done.'" - RIP G.C.

Pages: 1 [2]

« previous next »